What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 02:44

2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
People’s Pharmacy: Did this OTC allergy medicine cause my excruciating knee pain? - OregonLive.com
[old diagram got deleted by accident]
But it can get overloaded, and no longer works.
(Dc diagram shown, AC is similar).
RFK Jr. Is Opening the Alternative Medicine Floodgates - Gizmodo
For this case there are devices called Metal oxide varistors (MOV).
This is where the MOV conducts again, and dissipated the energy.
A fuse is a non-resetable over current circuit protector.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is 'the assistant's answer'
One
What is the lowest probability event you have personally witnessed?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It also is a device that limits the change in current flow.
a photo is worth a thousand words.
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
Barnstars:
Panel approves changes to enhance the flow of the game in men’s basketball - NCAA.org
Can the fuse protect the electronic devices from lightning instead of a surge protector.
I post the exact comment here.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What is lightning?
2024–10–14 [Omar Gharbi Omar Gharbi ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
what exactly is a ‘surge’ protector?
Here is a simplified AC power diagram.
Why are white women so hard to date?
This device then solves the entire problem.
At one ohm, the resistor has a maximum of 1 watt power.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What are the coolest new smart home gadgets to upgrade your living space?
First Sentence:
This one hit behind the barn.
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What does a fuse do?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
At least they know the answer if they wanted it.
What are some difficulties in a JEE aspirant's life?
the problem then depends on "how fast does the fuse operate?".
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
so, what happens?
What are the best examples of reverse psychology?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The other is “what does a “fuse” do?”
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
but this device (an Inductor) … impedes the rapid changes in the current.
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There are three different concepts here that are getting confused.
These are simplified answers to the original question, and does not change anything I wrote above.
It seems Mohan does not understand the difference between a comment and an Answer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[image of Common-mode choke]
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–16 [ OO OLAOYE OYEBODE ]
The third is lightning and “how it gets conducted into a home.”
He then asserts :
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
nine
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One is “what exactly is in a ‘surge protector’ ? ”
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
There are two important concepts here.
Now when you have a certain ac resistance, then a current flows in a loop.
Because the load is inductive, the current lags the voltage.(by a bit).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
In schematic diagrams this is the symbol for a fuse:
Upvotes:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is where this question deviates from being a 'generic' question, and becomes more specific.